Search the Community

Showing results for tags 'SNMP'.

More search options

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


  • LogicModule Exchange
    • LM Exchange
    • LM Staff Contributions
  • Product Announcements
    • LogicMonitor Notices
  • LogicMonitor Product Q&A
    • Feature Requests
    • Ask the Community
    • From the Front

Find results in...

Find results that contain...

Date Created

  • Start


Last Updated

  • Start


Filter by number of...


  • Start



Found 12 results

  1. Tom Lasswell

    Cisco Info PropertySources

    This one goes into some additional detail but hasn't been completely cleaned up for debugging purposes. The ones that have switch stacks pull all the stack serials and model numbers. Work in progress was the versioning. We have about 1500+ network devices across many many different models and versions so this has taken a little bit of work to get to work across all. MWXMXZ - Cisco-IOS FKA79M - Cisco IOS XE 9LF63N - NXOS G366DD - Cisco ASA
  2. Rhollebrand

    SNMP - Use RAW value in datapoint

    Goodmorning, I'm trying to create some custom datapoints for an marine antenna control unit (ACU). A lot of the data consists of non numeric output, and with those I'm struggling at the moment. One example is the SNMP output for "Longtitude/Lattitude" this consists of numbers and a letter. Below is the output (and error) I receive when polling: Timestamp: 2018-10-11 10:47:41 Normal Datapoints 1 item iAcsStatusLat NaN Fail to get the result of this oid OID is . Raw value is 53.683331 N Hide Raw Request/Response . 53.683331 N As you can see the "Raw value" is nicely polled, but the datapoint cannot process it (probably due to the "N" in the data). Simpler data like "heading" is not an issue and is nicely being polled and written to the graphs. Basically I just want the datapoint just to poll the raw data, and plot it to the datapoint. Can anybody point me in the right direction? Br, Ralf
  3. Has anyone else experienced any issues with Collector 27.002? I updated our SNMP collector (8G RAM, about 600 devices) a few days ago and twice it has gone down with memory maxing out. Have downgraded back to 27.000. I did a Send Logs to LogicMonitor, if it helps.
  4. LanceiT1

    SNMP v3 and SonicWall

    Hello all! We have a client that uses SonicWall and we are having some issues bringing the device into LogicMonitor. We have confirmed that SNMP is enabled on the device(s) and that SNMP is being allowed out of the Interface. Moreover, we have setup a User/Group for our monitoring using MD5, AES and a key for both that we have created. We have also set this group to have Root Access. Additionally on the current configuration for SNMP we see that Get Community Name, Trap Community Name and Host 1 are populated with information. Host 1 being the NAT'd IP address of the environment. When attempting to Run Active Discovery we see that on the logs on the SonicWall that the logs suggest that the Engine ID is incorrect. However we are using the Engine ID that is shown in simple plain text within the SNMP configuration using the snmp.contextEngineID function within the devices' properties. However when running tests it seems that everything returns as Invalid Engine ID no matter what the issue seems to be. So any other ways that anyone here knows how to get these devices into LogicMonitor when the device is using SMNP v3?
  5. YChang

    SNMP Trap Eventsource

    We need to be able to filter on the message context inside the SNMP trap, not just: enterpriseOid, generalCode, snmpVersion, specificCode, trapOid Thanks
  6. long post.. I'm posting this more as an informational; this is what we did to collect everything through snmp rather than open up any ports like ssh... If you have ideas on making it better I'm all ears! Nothing fancy.. I modified the code from the real world example that snmp pass_persist gives on their page... the main script loads stuff from a YAML config file then calls each python module, passing the snmp pass_persist object (pp) and config object over to them. The modules will run a quick test to see if they actually need to run... for example if the machine doesn't have DNS, then the dns_stats doesn't need to run. The File Monitor and DNS Stats are capable of monitoring multiple instances. Things that I want still: -- The file monitor oids will change for files if a file is added or removed.. so maybe we set LM to do autodiscovery based on a key or lookup instead ?! -- The above applies to software raids.. may need a state file to cache things in, or again.. key/lookups instead. -- dns_stats calls an external bash script to do the parsing because my python woo is very weak -- clean up / insert comments everywhere ! snmpd.conf (add this line to the bottom) pass_persist . /usr/share/snmp/extensions/lm/ config.yml: (/usr/share/snmp/extensions/lm/) --- dns: instances: - name: 'Main DNS' config: '/etc/named.conf' stats: '/var/named/data/named_stats.txt' - name: 'Special voodoo DNS' config: '/etc/named.voodoo.conf' stats: '/var/named.voodoo/data/named_stats.txt' file_monitor: directories: - '/var/opt/logs/servers' - '/var/opt/logs/network' Main script: (/usr/share/snmp/extensions/lm/ #!/usr/bin/python -u # -*- coding:Utf-8 -*- # Option -u is needed for communication with snmpd import sys sys.path.append('/usr/share/snmp/extensions/lm/libraries') import snmp_passpersist as snmp import os, re, socket, syslog, time, errno import LM_Config as cfg import LM_Software_Raid import LM_FileMonitor import LM_dns_stats # Global vars pp = None config = cfg.loadConfig() VER = "Logic Monitor SNMP Helper v0.1" POLLING_INTERVAL = 60 MAX_RETRY = 5 OID_BASE = "." def update_data(): pp.add_str('0.0',VER) ## This is needed because the variable isn't getting reset to 0 inside the modules LM_Software_Raid.doUpdate(pp) LM_FileMonitor.doUpdate(pp,config) LM_dns_stats.doUpdate(pp,config) def main(): syslog.openlog(sys.argv[0],syslog.LOG_PID) retry_timestamp=int(time.time()) retry_counter=MAX_RETRY while retry_counter>0: try: global pp syslog.syslog(syslog.LOG_INFO,"Starting Logic Monitor SNMP Helper...") # Load helpers pp=snmp.PassPersist(OID_BASE) pp.start(update_data,POLLING_INTERVAL) # Should'nt return (except if updater thread has died) except KeyboardInterrupt: print "Exiting on user request." sys.exit(0) except IOError, e: if e.errno == errno.EPIPE: syslog.syslog(syslog.LOG_INFO,"Snmpd had close the pipe, exiting...") sys.exit(0) else: syslog.syslog(syslog.LOG_WARNING,"Updater thread as died: IOError: %s" % (e)) except Exception, e: syslog.syslog(syslog.LOG_WARNING,"Main thread as died: %s: %s" % (e.__class__.__name__, e)) else: syslog.syslog(syslog.LOG_WARNING,"Updater thread as died: %s" % (pp.error)) syslog.syslog(syslog.LOG_WARNING,"Restarting monitoring in 15 sec...") time.sleep(15) # Errors frequency detection now=int(time.time()) if (now - 3600) > retry_timestamp: # If the previous error is older than 1H retry_counter=MAX_RETRY # Reset the counter else: retry_counter-=1 # Else countdown retry_timestamp=now syslog.syslog(syslog.LOG_ERR,"Too many retry, abording... Please check if xen is running !") sys.exit(1) if __name__ == "__main__": main() (/usr/share/snmp/extensions/lm/libraries) #!/usr/bin/python import sys sys.path.append('/usr/share/snmp/extensions/lm/libraries') import yaml file = '/usr/share/snmp/extensions/lm/config.yml' def loadConfig(): try: with open(file) as f: return yaml.load(f) except: print(file + " doesn't exist") (/usr/share/snmp/extensions/lm/libraries) #!/usr/bin/python import sys sys.path.append('/usr/share/snmp/extensions/lm/libraries') import re import mdstat import json import argparse import LM_Config as cfg md = mdstat.parse() def testModule(): config = cfg.loadConfig() if len(md['devices']) > 0: return True else: return False def to_bool(*args): try: if args[1] == "rev": if args[0] == True or args[0] == None: return 1 elif args[0] == False: return 0 except: if args[0] == True or args[0] == None: return 0 elif args[0] == False: return 1 else: return s def doUpdate(pp): if testModule(): # headers for each section in the for loop(s) pp.add_str('1.0',"md name") pp.add_str('1.1',"md status") # 1.2 is in the next loop pp.add_str('1.3',"md raid type") pp.add_str('1.4',"Disks in software raids") pp.add_str('1.5',"Disks Faulty Status") pp.add_str('1.6',"DiskX belongs to mdX") i = 0 for mdCounter,mdValue in enumerate(sorted(md['devices'])): # 1.0.x md names pp.add_str('1.0.' + str(mdCounter),mdValue) # 1.1.x md status pp.add_str('1.1.' + str(mdCounter),to_bool(md['devices'][mdValue]['active'])) # 1.2.x.0.0 md disk count pp.add_str('1.2.' + str(mdCounter) + '.0.0', mdValue + " disk count") # 1.2.x.1.0 md non faulted disk count pp.add_str('1.2.' + str(mdCounter) + '.1.0', mdValue + " non faulted disk count") # 1.3.x md type pp.add_str('1.3.' + str(mdCounter),md['devices'][mdValue]['personality']) fault = 0; count = 0 for dCounter,dValue in enumerate(md['devices'][mdValue]['disks']): pp.add_str('1.4.' + str(i),dValue) disk_fault=to_bool(md['devices'][mdValue]['disks'][dValue]['faulty'],"rev") fault = fault + to_bool(md['devices'][mdValue]['disks'][dValue]['faulty']) pp.add_str('1.5.' + str(i),disk_fault) pp.add_str('1.6.' + str(i), mdValue) i = i + 1 count = count + 1 # 1.2.x.0.x & 1.2.x.1.x pp.add_str('1.2.' + str(mdCounter) + '.0.1', count) pp.add_str('1.2.' + str(mdCounter) + '.1.1', fault) (/usr/share/snmp/extensions/lm/libraries) #!/usr/bin/python import sys sys.path.append('/usr/share/snmp/extensions/lm/libraries') import os import time import glob from stat import * dirs = [] # Nice little function to convert True / None to 0 and False to 1 def to_bool(s): if s == True or s == None: return 0 elif s == False: return 1 else: return s def testModule(config): for dir in config['file_monitor']['directories']: if os.path.isdir(dir): dirs.append(dir) if len(dirs) > 0: return True else: return False def doUpdate(pp,config): # Test if we should run this module and return anything if testModule(config): x = 0 pp.add_str('2.0.0',"Directories") pp.add_str('2.0.1',dirs) for dir in dirs: os.chdir(dir) pp.add_str('2.2.0', "Last Check Time (epoch)") pp.add_str('2.2.1', time.time()) pp.add_str('2.2.3', "Files") pp.add_str('2.2.4', "Modification Time at last check (epoch)") pp.add_str('2.2.5', "Full Path") pp.add_str('2.2.6', "File size") pp.add_str('2.2.7', "Created (epoch)") pp.add_str('2.2.8', "Access Time (epoch)") for counter,value in enumerate(glob.glob("*")): statinfo = os.stat(value) pp.add_str('2.2.3.' + str(counter), value) pp.add_str('2.2.4.' + str(counter), str(statinfo[8])) pp.add_str('2.2.5.' + str(counter), dir + '/' + value) pp.add_str('2.2.6.' + str(counter), str(statinfo[6])) pp.add_str('2.2.7.' + str(counter), str(statinfo[9])) pp.add_str('2.2.8.' + str(counter), str(statinfo[7])) x = x + 1 else: pp.add_str('2',"LM_FileMonitor module did not find any directories to monitor") (/usr/share/snmp/extensions/lm/libraries) #!/usr/bin/python import sys sys.path.append('/usr/share/snmp/extensions/lm/libraries') import os import re import subprocess dns_stats = [] dns_desc = [] def testModule(config): for instance in config['dns']['instances']: stats_file = instance['stats'] if os.path.exists(stats_file) and os.access(stats_file, os.R_OK): dns_stats.append(stats_file) dns_desc.append(instance['name']) if len(dns_stats) > 0: return True else: return False def doUpdate(pp,config): if testModule(config): i,dnsx = 0,0 for stats_file in dns_stats: if dnsx == len(config['dns']['instances']): dnsx = 0 pp.add_str('3.0.' + str(dnsx), str(dns_desc[dnsx])) pp.add_str('3.1.' + str(dnsx),"Stats from " + stats_file) script = "/usr/share/snmp/extensions/lm/helper_scripts/" incoming = subprocess.check_output([script, stats_file, 'incoming']) outgoing = subprocess.check_output([script, stats_file, 'outgoing']) resolver = subprocess.check_output([script, stats_file, 'resolver']) socket = subprocess.check_output([script, stats_file, 'socket']) ## Incoming i = 0 for s in re.split('\n',incoming): data = re.split(',', s) if len(data[0]) > 0 and data[1] > 0: pp.add_str('' + str(i), data[0]) pp.add_str('3.2.1.' + str(dnsx) + '.' + str(i), data[1]) i = i + 1 ## Outgoing i = 0 for s in re.split('\n',outgoing): data = re.split(',', s) if len(data[0]) > 0: pp.add_str('' + str(i), data[0]) pp.add_str('3.3.1.' + str(dnsx) + '.' + str(i), data[1]) i = i + 1 ## resolver i = 0 for s in re.split('\n',resolver): data = re.split(',', s) if len(data[0]) > 0: pp.add_str('' + str(i), data[0]) pp.add_str('3.4.1.' + str(dnsx) + '.' + str(i), data[1]) i = i + 1 ## socket i = 0 for s in re.split('\n',socket): data = re.split(',', s) if len(data[0]) > 0: pp.add_str('' + str(i), data[0]) pp.add_str('3.5.1.' + str(dnsx) + '.' + str(i), data[1]) i = i + 1 dnsx = dnsx + 1 else: pp.add_str('3' + "LM_dns_stats module did not find any bind intances from the config file") (/usr/share/snmp/extensions/lm/helper_scripts/) #!/bin/bash file=${1} [ -x ${file} ] && exit 0 [ -f ${file} ] || exit 0 dnsNames=(A A6 AAAA ANY CNAME DNSKEY DS MX NAPTR NS PTR SOA SPF SRV TXT) resNames=('mismatch responses received' 'IPv4 queries sent' 'IPv4 responses received' 'NXDOMAIN received' 'SERVFAIL received' 'FORMERR received' 'query retries' 'query timeouts' 'queries with RTT < 10ms' 'queries with RTT 10-100ms' 'queries with RTT 100-500ms' 'queries with RTT 500-800ms' 'queries with RTT 800-1600ms' 'queries with RTT > 1600ms') sockNames=('UDP/IPv4 sockets opened' 'UDP/IPv4 sockets closed' 'UDP/IPv4 socket bind failures' 'UDP/IPv4 connections established' 'UDP/IPv4 recv errors' 'TCP/IPv4 sockets opened' 'TCP/IPv4 sockets closed' 'TCP/IPv4 socket bind failures' 'TCP/IPv4 connections established' 'TCP/IPv4 recv errors') now_epoch=$(date +%s) mtime_epoch=$(stat ${file} -c %W) function updateStats { [ -f ${file} ] && [ $((now_epoch-mtime_epoch)) -gt 300 ] && rm -f $file && rndc stats } function getStats { start=$1 end=$2 regx1="sed -n '/${start}/,/${end}/p'" data=$(cat ${file} | \ eval ${regx1} | \ egrep '[0-9]' | \ awk '{ print $1" "$2 }') while read value name; do names+=(${name}) values+=("${value}") done <<< "${data}" for n in $(eval echo \${${3}[@]}); do regx2="${n}" if [[ ! "${names[@]}" =~ "$regx2" ]]; then names+=(${n}) values+=("0") fi done x=0 for n in ${names[@]}; do echo "${names[$x]},${values[$x]}" x=$((x+1)) done } function inStats { getStats "Incoming Q" "Outgoing Q" "dnsNames" } function outStats { getStats "Outgoing Q" "^+" "dnsNames" } function resStats { for n in "${resNames[@]}"; do regexp=" ${n}$" name=$(echo ${n}) value=$(egrep "${regexp}" ${file} | \ sed -n 's/.* \([0-9]*\) \([A-Za-z].*\)/\1/p') [ ${#value} -eq 0 ] && value=0 echo "${name},${value}" done } function resSocket { for n in "${sockNames[@]}"; do regexp=" ${n}$" value=$(egrep "${regexp}" ${file} | \ sed -n 's/.* \([0-9]*\) \([A-Za-z].*\)/\1/p') [ ${#value} -eq 0 ] && value=0 echo "${n},${value}" done } # all returns get the timestamps.. echo "stats_epoch,${mtime_epoch}" echo "now_epoch,${now_epoch}" case ${2} in incoming) inStats;; outgoing) outStats;; resolver) resStats;; socket) resSocket;; *) inStats;; esac # Call createStats last.. if we destroy first then query the file, values will be small to 0 as the values start at time of stats creation. If we call at the end, the next polling will have data during the time period from poll to poll. updateStats exit 0
  7. If you have multiple snmp community strings within your environment but they're not consistent within any particular subset of devices, you might want to add them as a list and have LogicMonitor decide which one works for any given device. This proof-of-concept DataSource lets you do that. You'll need an API user within your LogicMonitor account, and that user will need rights to manage all devices (or at least, all that you may need to apply this method to). For that user you'll need to create an API token ID/Key pair; these values should be set at in your device tree as the values of properties apiaccessid.key and apiaccesskey.key - ideally at the root level but certainly, again, to apply to any device you want the DataSource to apply to. You'll also need to create a third device property, snmp.communities.pass, whose value should be a comma separated list of your possible community strings, with no extraneous space - e.g. communityString1,snmpStringForMonitoring,m0n1t0r1n6,communityRO. This value can be set globally and/or at subgroup levels as appropriate. Be aware that each incorrect community string will add a few seconds to the script execution time, as each one has to time out, so large lists and high-frequency polling intervals could cause problems. Be sensible, and limit the content of snmp.communities.pass to only the values that will exist within the groups it's being set for. This DataSource will apply to any device that has or inherits snmp.communities.pass, and *either* has no system.sysinfo *or* is known to be an SNMP device. This means the script will test the various community strings against any device that is as yet not identified, or has previously responded to SNMP (but possibly no longer is). The script will attempt to get SNMP data from the Interfaces table of the device, as the vast majority of SNMP devices reveal this data. If the configured value works, no action is taken. If doesn't work, but exactly one of the other options in snmp.communities.pass does, then the API is called and the 'correct' community string is added to the Device. The DataSource will run this check every 5 minutes (which can of course be altered) such that any changes to the SNMP community string of the actual device can be caught and the Device in LogicMonitor updated, provided the new community exists in the csv list you've defined. *Important:* As with any .pass, .password, .key, or property, the value shown in the UI will be obscured as eight stars or blobs. You *cannot* simply add further text to the existing stored string; if you need to add another value to the csv list you will have to replace the whole list. E.g. If you store 'communityString1,snmpStringForMonitoring' in snmp.communities.pass, then want to add m0n1t0r1n6 and communityRO later, you cannot simply edit the field and paste ',m0n1t0r1n6,communityRO' onto the blobs - that would save as '********,m0n1t0r1n6,communityRO'. You'd have to delete the blobs and paste in 'communityString1,snmpStringForMonitoring,m0n1t0r1n6,communityRO' (without the quotes). *More Important:* Note that by adding the apiaccessid.key and apiaccesskey.key properties into your account, other DataSources could equally make use of their rights. Clearly, you will already have limited access into the Settings area of LogicMonitor such that only trusted users can create or modify LogicModules, or access the Collectors, using LogicMonitor's RBAC abilities. v1.0.0: GWHLED
  8. Can I also make a feature request to retain the custom thresholds / attributes (user optional, probably by means of a toggle button to choose between overwrite or leave as is ) while updating LogicModules? I did notice related requests from the past and it seems that it is not yet released.
  9. Mahlon Greene

    Uptime - Bug Report

    I’d like to re-initiate this bug report. The Uptime resetting counters at 497 days or 469 days (historical) I just had a similar false alarm telling me that my devices rebooted, when they did not. Please have the DEV team review this specific monitor and determine how the system can display 497+ days “uptime” --------------------------------- ________________________________________ SEP 11, 2015 | 01:56PM CDT Original message ________________ wrote: Support team at logic monitor, Is it possible to request adjustment to the "Uptime" data source monitor so that it does not alert when the counter resets from 11111111111111111111111111111111 to 00000000000000000000000000000001 The developer was aware enough of the event cause to code explanation in to the system alert: could the alert be altered to not-alert when the counter resets? - ________________ From: ________________ Sent: Friday, September 11, 2015 2:44 PM To: Subject: SC# Error: 6348 ________________ is reporting it has only been up for 0.43 minutes Hello ________________ , We have received the following monitoring alert and a ticket #6348 has been created to track your issue. An engineer is assigned and is working to resolve this issue. Thank you. We are investagating if the VM really did reboot or if this alert is coming up for a different reason: ________________is reporting it has only been up for 0.43 minutes, as of 2015-09-11 14:28:48 EDT. If this was an unexpected reboot, please investigate the system logs. NOTE: if ________________has been up for 469 days without a reboot, this alert will trigger due to a counter wrap in the host. In this case, you may disregard this alert. (But the host is probably due for an OS update.) For any inquiries please contact our NOC at<> or call 1-855-485-8324 (TECH). Regards, ________________ NOC Support Engineer
  10. We have some Linux servers for which we need to use SNMP for OS monitoring, but we also need to use SNMP for some application monitoring. The applications bind to a different port, since the OS is bound to the standard SNMP port, 161. We would like to be able to use the embedded scripting, so please make it possible to specify a port with the Snmp.get() command: a = Snmp.get(host,".")
  11. Horace Cheung

    Alert driven SNMP set request

    Hi, I had a discussion with John Matthews this morning and would like to raise this as a feature request. Let's assume a Linux VM is monitored by LogicMonitor via SNMP. If this disk space exceeded 90%, I (IT administrator) want to issue a SNMP set query to execute a script to either troubleshoot that VM or run some clean up routines. As of today LogicMonitor only allows user to post this alert into external system ( Is there any chance this feature request can be enabled for future LM release? Thanks & Best Regards, Horace
  12. I started working on the best-practice of implementing Collector dashboards, which revealed to me a number of undesirable conditions of which I hadn't previously been aware and suggest that I need to go through some Collector Tuning excercises. LogicMonitor has an excelllent reference page on this topic For those of you who are monitoring any density of Juniper devices, 1)I feel your pain; 2)I would recommend that you use this Juniper reference to complement LM's instructions. And another note: you can look for my previous thread for details if you want, but I do not at all recommend using SNMPv3 to monitor either Juniper Virtual Chassis (switch stack) or Juniper routers with multiple Routing Engines. If you've somehow managed to consistently and successfully do this, I'd appreciate a post with your solution.